E-Tac Collar 1.75" Assembly Guide

THANK YOU FOR CHOOSING K9 TACTICAL GEAr! PLEASE SWIPE LEFT TO RIGHT AND FOLLOW THE DIRECTIONS BELOW TO ASSEMBLE YOUR E-TAC 1.75" Collar.

files/Step_1.jpg

STEP 1:

Remove E-Tac Cover from Collar. Place aside for now, as you will need to re-apply in a later step.

files/Step_2.jpg

STEP 2:

Undo One-Wrap Velcro, leave the Velcro strips loose and positioned apart. 

files/Step_3.jpg

STEP 3:

Unscrew/Remove E-Collar contact points from your receiver. Do not force the threaded studs through the pre-fabricated holes with prongs still attached as this will damage the collar and void your product warranty.

files/Step_4.jpg

STEP 4:

Place E-Collar on the outside face of the collar and align the threaded studs with the pre-fabricated holes.

files/Step_5a.jpg

STEP 5A:

Feed One-Wrap Velcro strips through guides on the receiver. Join the strips together with to secure the receiver.

files/Step_5b.jpg

STEP 5B:

Feed One-Wrap Velcro strips through guides on the receiver. Join the strips together with to secure the receiver.

files/Step_5c.jpg

STEP 5C:

Feed One-Wrap Velcro strips through guides on the receiver. Join the strips together with to secure the receiver.

files/Step_6.jpg

STEP 6:

Screw the contact points back onto the receiver from the inside of the collar.

files/Step_7.jpg

STEP 7:

Begin applying the cover by aligning loop Velcro end closest to the V-Ring attachment.

files/Step_8.jpg

STEP 8:

Work your way towards the receiver, firmly pressing down Velcro around all edges of receiver. Continue until entire cover is secured to Collar.