Please Read:Please read the following before placing an order:
This product will Notfit E-Collars with winged prongs
This product is compatible with all Dogtra, E-Collar Technologies, and Garmin E-Collars sold on our site. If you aren't sure of your unit's compatibility, please contactus before placing an order.
Measure your dog to ensure the correct size is selected.
The E-Tac Collar is an exclusive K9 Tactical Gear Design. Unlike copycat products, we are the original designers of this collar. We sourced the finest components available on the market and designed this one-of-a-kind collar.
Our lead designer was the first to integrate an e-collar into a flat collar. This allows for the elimination of an extra piece of equipment on your dog.
The benefit of using this collar is being able to ditch the standard rubber strap that you have to constantly re-adjust. You can set this collar once and be done! The wide construction of the collar can cover and help distract strangers from seeing or asking questions about the use of training aids. It also comes equipped with the space for ID panels.
This collar has a buckle fur guard to help keep your dog's hair from getting caught in the buckle.
The V-Ring is set high for ease-of-use and a more ergonomic design. This unique placement of the V-Ring opposite to the buckle allows the attachment point to sit near the top of the canine's neck for ease of leash connection. The collar is held together with a high strength bar-tac stich pattern commonly used in skydiving and rock-climbing equipment.
This collar comes standard with the following:
A aluminum alloy black polished slide adjuster, forged V-Ring attachment point, and a 1.75” Pro Style AustriAlpin buckle.
Loop attachment (velcro) is 6"
This collar is compatible with all leash snap options
Product Specs & Compatibility
1.75" Mil-spec nylon webbing with a 5000lb tensile strength
2500lb Rated V-Ring
2500lb tensile strength
Minimum breaking load is 18kN
All hardware has a Mil-spec rating for a reliable and safe collar
Available in Traditional colors only
ALL SIZES: 6"
ID Panels sold separately. If you would like to purchase an ID Panel,click here!
This collar only has space for one ID panel. This collar is not to be used with a tie out.
We are a dealer for: Dogtra, Tritronics, E-Collar Technologies
As long as the contact points can be unscrewed from your e-collar receiver, your collar should work for our E-Tac Collar
Charging Your E-Collar:
You can simply push the nylon webbing aside to plug your charging cord in
It will not damage the nylon
You also can remove the probes and take the E-Collar out of the collar to charge
E-Collar must have removable contact points to work with this collar.
This product is designed to fit medium-sized and large-sized breeds. this collar is available in the following sizes
Please measure your pet or working dog's neck with a soft measuring tape or piece of string to get the most accurate measurement. Our collar measurements are listed above in inches or centimeters.
Please get a snug measurement of your dogs neck to fit this collar properly.
Refer to Sizing Guideimage in product gallery to make sure your dog gets the proper fit!
Where do I attach my leash to this collar?
The E-Tac Collar 1.75” features a steel V-Ring for independent attachment. How many panels can I attach to this collar? What size can they be? The Tac 2 1.75” can fit up to 6” of panels/patches. Customizable ID panel comes at a maximum length of 6” depending on text lettering, so you’re still left with extra space for additional panels/patches.
What is the purpose of the elastic band? The elastic band is designed to retain the layers of collar webbing if it’s adjusted. Once the slide adjuster is moved to shorten the collar, it leaves a space for the webbing to expand freely. The band prevents this to avoid snagging.
My contact points are too large for the holes. What should I do? The contact points on E-collars are typically threaded caps and should be unscrewed before mounting to the E-Tac collar. Once the threaded studs are fed through the holes and E-Collar secured by Velcro, you can thread the caps back on.
Shipping & Returns
Production lead time:
This item is made to order and hand crafted in our shop in Rocklin, CA. This product follows our current lead time, please see our front page for the most accurate time frame.
If you would like to make a change to your order, send an email to firstname.lastname@example.org.
Signature Required is added to all USPS domestic orders over $250.00. If your order is over $250.00 and you would like to remove signature required, please add it to the notes of your order.
Unfortunately, we have no control over any customs or import fees for international shipments